Weight: 305g
Length: 520mm
Power system: 370motor
Transmitter: Standard 6 CH CCPM PPM transmitter
Mix controller: 4in1 controller(W/Gyro,mixer,ESC,receiver)
Servo: 8.0g,1.3kg/cm,0.13s/60deg
Battery: 11.1V 1000mAh Li-Polymer
Content
Description
CCPM(cyclic collective pitch mixing) design provide precise movement and lighten the heli.
Bell-hiller mixer provide immediate respond to the helicopter.
The transmitter directly output CCPM signal, all mixing is done by the
transmitter.
Function:
6 channel
LCD battery voltage display
Reverse switch
Changeable crystal
with 8AA battery holder
Trainer function/switch
3D switch
p.s. Negative shift for 72Mhz
120 deg CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the heli,
and weight is greatly reduced.
Bell-heller mixing greatly increase the sensitive of the whole heli, which provide good aerobatic responds.
O-ring inside the center hub reduce oscillation of main blades
11.1V high capacitance battery provide enough power for any aerobatic flight.
Light and hardened wood blade provide great lift, only weigh 11g.
Metal ball swashplate has improved the stability and sensitive of the whole machine.
Pre position servo mounts have been added in this heli, servos can be mounted solidly by screw and easy to install.
With length-adjustable servo push-rod, precision sub trim can be easily set.
Separate main shaft and main gear reduce repair time and noise.
Extended tail boom, reduced the load of tail motor.
Weight is a key to a EP heli, lightened skid set, main gear, main frame and canopy reduce the load of whole heli.
Provide excellent performance outdoor and indoor.
Suggested upgrade
Direct drive tail